• Safety Glasses --$10.00 (Safety glasses must meet ANSI Z87 specifications and MUST be worn by the student at all times in the welding lab and adjoining areas.)

 

  • Welding helmet -- $43.00 (Must meet ANSI Z87 specifications and MUST be approved for overhead welding.) Low Quality Auto-Darkening Helmets Are Not Recommended. We recommend the Huntsman 951P helmet with a #10 shade lens.

 

  • 15 clear plastic cover lenses for welding helmet -- $20.00 (Cover lenses need to be replaced weekly)

 

  • SMAW & GMAW welding gloves (Tillman #750 or equivalent) - $20.00

 

  • GTAW welding gloves (Tillman #25 or equivalent) - $10.00

 

  • Locking pliers (Vise grip #10R or equivalent) - $18.00

 

  • Adjustable wrench (Crescent #AC18 or equivalent) - $15.00

 

  • Ball peen hammer (Stanley 54-032 or equivalent) $15.00

 

  • Half round file with handle (Nicholson 14” pipe liner or equivalent) $40.00

 

  • Radius marker (Curve-O-Mark Mini #1208 or equivalent) $27.00

 

  • Welding cap (Comeaux or equivalent)-- $8.50

 

  • 25’ Tape measure (Stanley #30-456 or equivalent)-- $12.00

 

  • Tip cleaners (Wypo Standard) -- $3.00

 

  • Chipping hammer (Atlas LCP or equivalent)-- $10.00

 

  • Wire brush (Wyler #44063 or equivalent) -- $5.00

 

  • Slip joint pliers (9") -- $6.00

 

  • Combination square (Empire #230 or equivalent)-- $12.00

 

  • Wrap‑A‑Round ( Curve-O-Mark #176B or equivalent)-- $10.00

 

  • Striker (Shurlite Three Way or equivalent) -- $4.00

 

  • Torpedo Level (Empire #991-9 or equivalent)-- $12.00

 

  • Leather welding sleeves or jacket (Tillman #3221 or equivalent) - $46.00

 

  • Calculator -- $25.00

 

  • Needle nose wire cutters or special MIG welding tool (Anchor #YS-50 or equivalent) -- $35.00

 

  • Layout tools including; mechanical pencil, radius marker, & ruler -- $15.00

 

  • Denim or khaki work pants – $35.00

 

  • Heavy duty 100% cotton welding shirt (Walls Heavyweight Khaki or equivalent) - $25.00

 

  • Work boots or shoes - $150.00

 

TOTAL $631.50